Configuration 1 · L1000*W27*H54
| Parameter | Value |
|---|---|
| Dimensions | L1000*W27*H54 |

Magnetic Track S07-R023 lists 4 catalog configurations. dimensions: L1000*W27*H54 / L1500*W27*H54 / L2000*W27*H54 / L3000*W27*H54.
4 configurations
| Parameter | Value |
|---|---|
| Dimensions | L1000*W27*H54 |
| Parameter | Value |
|---|---|
| Dimensions | L1500*W27*H54 |
| Parameter | Value |
|---|---|
| Dimensions | L2000*W27*H54 |
| Parameter | Value |
|---|---|
| Dimensions | L3000*W27*H54 |
| Parameter | Configuration 1 · L1000*W27*H54 | Configuration 2 · L1500*W27*H54 | Configuration 3 · L2000*W27*H54 | Configuration 4 · L3000*W27*H54 |
|---|---|---|---|---|
| Dimensions | L1000*W27*H54 | L1500*W27*H54 | L2000*W27*H54 | L3000*W27*H54 |
Magnetic Track S07-R023: Coordinate rail section, joints, feeds and end components as a system, using the component drawing before ceiling set-out.
For Magnetic Track S07-R023, select the recorded dimensions and assembly role, then confirm lengths, quantities, joints and end parts against the approved layout.
Recorded for this product: Surface mounting with screws. For Magnetic Track S07-R023, compare physical interfaces, dimensions, electrical connections and the intended component combination. Matching appearance or voltage does not prove cross-system compatibility; confirm the complete component schedule.
Recorded for this product: 48 V. For Magnetic Track S07-R023, match the recorded supply type and voltage to the approved wiring plan, cable route and connection protection. Have electrical compatibility checked before energising; do not substitute another supply from appearance alone.
For Magnetic Track S07-R023, send your preferred finish, dimensional constraints, installation context and quantities. Review feasibility for the selected configuration; the approved quotation and drawing define supply, rather than assuming every requested change is standard.
For Magnetic Track S07-R023, request available drawings, installation instructions and the connection/component schedule. Confirm dimensions and scope for the exact version; luminaire photometry belongs to the matched light source, not to a passive component alone.